1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Journal/Spec/Sample to bulk

Journal / Spec & production

Will the bulk order match the sample? Usually — here is what moves.

'Same as sample' is the most common instruction on a purchase order and the least enforceable. A sample proves the design and the construction; it does not freeze the colour, because colour is decided again on every run.

Filed under SpecPublished September 2026Reading 5 min
Plate 01Cream mahjong mat with tiles mid-game on a linen-covered table
Sample and bulk from the same file

What a sample actually proves

A sample proves four things: the construction (surface, base, thickness, edge), the design (layout, crop, where the border lands), the print method, and the packaging. Those are the expensive things to get wrong, and a sample settles them for a few dollars.

It does not prove colour. Every run is a fresh ink load and a fresh fabric lot, and both shift. A sample printed in March and a production run in July are not the same colour, even from the same file on the same machine.

The four sources of drift

SourceTypical effectControlled by
Fabric lot±3–5% on saturation, more on dark groundsOrdering the whole run from one lot
Ink batchSmall shift in cyan and magentaPrinting a colour bar and keeping it
Cure temperatureDull or bronzed darks if under-curedCalibrated press, retained sample
Substrate batch (board)Print reads chalkier on a denser boardSame board supplier for the run
Fig. 02Paisley mahjong mat on a low table under a rechargeable table lamp
Second run, same dye lot

How to write an order that holds the match

  1. Approve a physical sample and keep a second one. A photo on a phone is not an approval — screens, white balance and ambient light make it meaningless.
  2. Put the approved sample's date and reference on the PO. 'Match retained sample S-2411.' Now there is a defined target rather than a memory.
  3. Ask for a pre-production sample on the bulk lot for anything brand-critical: same fabric lot, same ink, before the run starts. It adds 2–3 days and removes the argument.
  4. Set a tolerance. ΔE of 2 or less is a professional standard for textiles. Say it out loud, then both sides know what 'match' means.
  5. Keep the digital file. We archive the print file and the die line permanently, so a reorder in eighteen months is a reprint rather than a redesign.

When it does not match

If a run is visibly off the approved sample, the question is whether it is inside tolerance. A 2 ΔE shift is production; a 6 ΔE shift is a mistake. Send a photo in daylight, next to the retained sample, and ask for the press record.

The remedy is usually a reprint of the affected quantity, which is why keeping one approved sample in a drawer is worth more than any clause in a contract.

Fig. 04Flower-shaped mousepad in grey with a mouse and a small plant
Third colourway

Plates

Seen on the press

03 plates
Cream mahjong mat with tiles mid-game on a linen-covered table
Sample01
Paisley mahjong mat on a low table under a rechargeable table lamp
Bulk02
Flower-shaped mousepad in grey with a mouse and a small plant
Colourway03

Questions

Can you guarantee an exact colour match to my sample?
No process can, honestly. What we can do is print a pre-production sample on the bulk fabric lot, agree a tolerance such as ΔE ≤ 2, and reprint anything outside it. Anyone promising an exact match on textile sublimation is describing something that does not exist.
Should I approve a sample by photo?
No. Screen colour, white balance and room light all change what you see. Approve a physical sample, in daylight, and keep a second one. It is the cheapest risk control in the whole order.
What is ΔE?
A numeric measure of colour difference. ΔE of 1 is about the limit of what an experienced eye notices; 2 is a professional textile tolerance; above 3 is visible side by side. It gives both sides a number instead of an opinion.
Do you keep my artwork for reorders?
Yes — print file and die line are archived permanently, and your artwork is never used for anyone else. A reorder is a quantity and a date, not a file resend.
How long does a pre-production sample add?
Two to three days, because it runs on the production line rather than a sampling bench. That is also why our samples are trustworthy: what the sample looks like is what the run looks like.
How many samples should I keep?
Two: one for you and one retained at the factory, both labelled with the PO number and the date. A dispute six months later is settled by the physical piece, not by an email thread or a photograph.

Read next

Send a pattern. Get a mockup tomorrow.

Artwork and a table measurement is all we need. No deposit, no tooling fee, no minimum beyond one piece.