1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Products/Kitchen drying mats

Product line 03 / 12 · kitchen drying mats

A sink mat that dries itself.

A fabric dish mat stays wet for hours and starts to smell in a week. A diatomite board takes the drip off a plate in seconds, gives it back to the air, and never needs the washing machine. We print it with your artwork in full colour, cut it to your sink footprint, and finish the edge so it does not chip when it meets a stainless rim.

From$0.85 / pc · 1 pc MOQ

From-price is an ex-factory (EXW Xiamen) unit price — excludes tax, shipping and packaging. Final quote varies with size, material, quantity and destination.

  • DIATOMITE BOARD
  • 40–60 CM
  • 9 MM
  • MOQ 1 PC
Plate 01Terrazzo-print shaped bath mat on a marble bathroom floor
Diatomite board · UV print · silicone feet

On the press

Terrazzo-print shaped bath mat on a marble bathroom floor
Printed face
Green floral mahjong mat with stitched border, laid on a wooden table
Edge finish
Geometric-print mousepad under a mouse, with notebook and pen on a desk
Print detail
Duck-shaped bath mat on a tiled floor beside a toilet
Shaped cut
Set of round printed mats styled as plates, with a mouse resting on one
Round board

What diatomite actually does

Absorption, not evaporation

Diatomite is a fossil shell powder pressed into a board. The shells are riddled with pores measured in nanometres, and capillary action pulls surface water inward within seconds. The board then releases it to the air from its whole face, so it is dry again in minutes rather than hours.

That is why the mat never feels damp and why it does not grow the sour smell a folded towel gets. It also means the board has a finite pore volume: eventually the surface pores load with limescale and washing-up residue and absorption slows. The fix is mechanical, not chemical — a light sand with 400-grit paper reopens the face.

Care, in one lineRinse and stand it up to dry. Do not soak it, do not put it in a dishwasher, and do not clean it with an oily detergent — oil fills the pores and a diatomite board cannot be degreased back to new.

What you can specify

Specification

Size
40 × 30, 45 × 35, 50 × 40, 60 × 40 cm, or cut to the counter run beside your sink. Rectangular, round, or with a corner notch for a tap base.
Thickness
9 mm standard — heavy enough not to skate, thin enough to sit under a plate stack. 6 mm for a lighter, cheaper board; 12 mm for a freestanding drainer.
Print
UV-cured ink printed directly onto the board, sealed. Full colour, edge to edge, with a matte finish. Photographic artwork holds well; very dark solid fields are possible but show water spotting more than light ones.
Edge
Chamfered or round-over, sanded. A sharp 90° edge chips when it meets a sink rim; a 2 mm round-over does not.
Feet
Silicone pads in the four corners, or a full cork sheet on the underside. Both keep the board off standing water, which is what stops the bottom face from staining.
Custom shape
Any outline you send — a board cut around a tap, a corner sink, or a branded silhouette. Die-cut shapes →
Packing
Corner protectors plus a moulded pulp or EPE cradle in a printed box. A bare board in a bag arrives chipped roughly one time in twenty.
MOQ
1 piece. The print is digital, so there is no plate and no setup fee.
Green floral mahjong mat with stitched border, laid on a wooden table
Hard board, printed face — the edge finish is what stops it chipping at a steel rim

Diatomite board or fabric dish mat

Two different products, often confused

Diatomite boardFabric / microfiber mat
Feels likeCool, hard, stone-likeSoft, quilted
Dries inSeconds to minutesHours, or overnight if folded
Best forPlates, glasses, cutlery, a wet sink runPots, pans, fragile stemware
Breaks ifDropped on a cornerNever — it just gets sour
Print resultUV, matte, slightly absorbent lookSublimation, sharp and saturated
Years of life3–5, sanded occasionally12–18 months before smell sets in
01PRINTED FACEjacquard / faux-velvet / PU02INKdye-sublimation, in the fibre03COREXPE foam or diatomite board04BASEnatural rubber, texturedTOTAL 2 / 3 / 5 MM

Printed face / ink / core / base — 2, 3 or 5 mm total

The listing detail that decides returns

Weight and sound

Buyers who have never handled a diatomite board expect something like a yoga mat. They get a 1.4 kg rigid panel that clacks when it is set down. That is not a defect, but if the listing does not say it, it reads as one — so put the weight, the thickness and the word 'rigid' in the first three lines of the description.

The second detail is where it sits. A board that bridges the sink gap will flex and eventually crack; one that sits fully on the counter lasts years. Show the footprint in a photo with a tape measure, the same way we show it on the size guide for mahjong tables.

Who buys these

Buyers

01

Home-goods DTC brands

A single hero print, four sizes, and a colourway family. Reprints match the archive without resending files.

02

Kitchen and houseware retailers

Private-label boards with a shop logo on the corner and a printed sleeve. Volume breaks start at 100.

03

Hospitality and Airbnb

Neutral prints that survive a commercial dishwasher-free cleaning routine, in the sizes that fit standard counter runs.

04

Gift and seasonal programmes

Mother's day, housewarming and holiday sets: board plus matching coasters in one box.

Plates

Seen on the press

06 plates
Terrazzo-print shaped bath mat on a marble bathroom floor
Terrazzo print, wet floor01
Duck-shaped bath mat on a tiled floor beside a toilet
Duck outline, die-cut02
Green floral mahjong mat with stitched border, laid on a wooden table
Stitched border option03
Geometric-print mousepad under a mouse, with notebook and pen on a desk
Print resolution test04
Black and panda shaped mats around the base of a toilet
Set of two, cut to fit05
Set of round printed mats styled as plates, with a mouse resting on one
Round, plate print06

Questions

Before you order

Does the print wear off when the mat gets wet?
No. The ink is UV-cured into a sealed coating on the board face, so daily water does not lift it. What does dull it over years is abrasion — scrubbing with a scouring pad. Use a soft sponge and the print outlasts the absorption.
Can the mat go in a dishwasher?
No. A dishwasher will destroy it: the board absorbs water under pressure, the binder softens, and it comes out warped or cracked. It is a countertop product. Rinse it in the sink, stand it up, and let it air-dry.
Why has my mat stopped absorbing?
Surface pores are loaded with limescale and washing-up residue. Sand the face lightly with 400-grit paper in a circular motion, wipe off the dust, and let it dry. Absorption comes back. Do not use oil-based cleaners — they fill the pores permanently.
Can you print a photo or a detailed pattern on diatomite?
Yes, at good quality. UV print on a matte board holds fine detail and photographs well, though colours read slightly chalkier than on fabric because the board absorbs a little light. Very dark full-bleed artwork shows water rings more than mid-tones — we will flag it on the mockup.
What is the minimum order and is there a plate fee?
One piece, and no plate fee. Digital UV printing needs no screen or plate, so a single custom board costs the same in setup as the thousandth. Unit price falls with quantity, not with artwork complexity.
How do you ship a rigid board without it arriving chipped?
Corner protectors, a moulded pulp or EPE cradle, and a printed box. Boards shipped in a plain poly bag chip at the corners in transit roughly 5% of the time — which is why we do not offer that as an option.

Send a pattern. Get a mockup tomorrow.

Artwork and a table measurement is all we need. No deposit, no tooling fee, no minimum beyond one piece.