1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Size guide

Every line · centimetres and inches · cut to the millimetre

Sizes, in the units
your listing uses.

One table per product line. Every figure below is a size we cut routinely, not a limit of what we can reach — if your number is not here, send it in millimetres and we cut to that. The inch column is the same mat: most retail listings sell in inches, most factory sheets are priced in centimetres.

12Product lines
1 pcMinimum order
±2 mmCut tolerance
24 hMockup turnaround

Measure the surface, not the furniture.

Almost every wrong size we see comes from measuring the wrong thing. A mahjong mat is measured on the flat playing area, not the cabinet. A doormat is measured on the opening, not the door slab. A pet mat is measured on the bowl footprint, not the bowl rim.

Three rules cover it: measure the flat surface the object will sit on, add the overhang you actually want, and send both numbers in millimetres. If the surface is not square, send the two sides separately — mats are cut as rectangles unless you ask for a shape.

Where a mat sits under something — a door, a chair, a lid — the clearance decides the thickness, not the size. A 5 mm mat under a door with 4 mm of clearance will not close, and that is a thickness problem, not a size problem.

Method

Three steps, in this order

01–03
01

Measure the flat surface

The area the mat will actually cover. For a table that is the playing surface inside the rails; for a sink that is the counter the drying rack stands on; for a doorway that is the opening between the jambs, not the door.

02

Add the overhang you want

Zero overhang for a mat that sits inside a frame or under a lid. Two to five centimetres a side for a mat that should read as a border. On a doormat, the overhang is what stops the mat walking when it is stepped on.

03

Check the clearance

Thickness is the number people forget. A door needs its gap measured, a chair the floor-to-frame height, a pet bowl the lip height. If the clearance is under 6 mm, ask for the 2 mm base rather than the 5 mm one.

Line 01

Mousepads & desk mats

cm / inch

Two families here, bought for different reasons. A mousepad is bought to a mouse; a desk mat is bought to a keyboard and a laptop. The sizes overlap between 60 and 90 cm, so the real question is depth: a pad is 20–30 cm deep, a desk mat 30–40 cm.

Common nameSize (cm)Size (inch)ThicknessWhat it is for
Small pad18 × 227.1 × 8.72 mmLaptop bag, trade-show giveaway, subscription box insert.
Standard pad25 × 209.8 × 7.92–3 mmThe default retail pad. Fits any desk, ships as a large letter.
Round padØ 20–25Ø 7.9–9.82–3 mmDie-cut circle; popular for cafés and co-branded merch.
Wide pad30 × 2511.8 × 9.83 mmMouse plus wrist room. A good middle SKU.
Desk mat, small60 × 3023.6 × 11.83–4 mmKeyboard and mouse on one surface. Best seller for home office.
Desk mat, medium80 × 3031.5 × 11.83–4 mmKeyboard, mouse and a notepad. The most common B2B size.
Desk mat, large90 × 4035.4 × 15.74 mmFull-width setup; the monitor stand sits on the mat.
Desk mat, XL100 × 5039.4 × 19.74–5 mmGaming and studio desks; needs a stitched edge to hold shape.

Thickness, in practice. 2 mm is a cloth pad on a thin rubber base: it rolls, ships flat in an envelope, and is what most print-on-demand buyers start with. 3 mm is the general-purpose number and what we recommend unless there is a reason. 4–5 mm is a gaming or premium pad — it needs a stitched edge, because a thick unstitched edge curls within weeks of rolling.

Line 02

Floor mats & doormats

cm / inch

The size question for a floor mat is not the floor, it is the door. A mat too close to the swing catches on the bottom edge and rucks up within a week, and that is the most common return reason in this line.

Common nameSize (cm)Size (inch)Typical use
Door mat, narrow40 × 6015.7 × 23.6Single-leaf interior door, apartment entry.
Door mat, standard50 × 8019.7 × 31.5The default retail doormat; fits most US and EU entries.
Door mat, wide60 × 9023.6 × 35.4Double doors, porch, mud room.
Runner, short60 × 12023.6 × 47.2Hallway, galley kitchen.
Runner, long80 × 15031.5 × 59.1Corridor, alongside a bed.
Area mat120 × 18047.2 × 70.9Living room, studio flat. The heaviest freight class in this line.

Measure the clearance first. Slide a coin under the door and close it — if a 3 mm coin will not pass, a 5 mm mat will not either. For a mat that must sit under a moving door, ask for the 2 mm diatomite board; for a mat that only sits against a wall or in front of a fixed door, thickness is a comfort question, not a fit question.

Line 03

Pet feeding mats

cm / inch

A feeding mat is not a small rug with a print on it. What makes it a feeding mat is the lip — a raised edge around the perimeter that holds spilled water and kibble on the mat instead of under it. Without the lip you are selling a coaster.

Common nameSize (cm)Size (inch)Bowl footprint it coversLip height
Single bowl30 × 4011.8 × 15.7One bowl up to Ø 20 cm5 mm
Double bowl40 × 6015.7 × 23.6Two bowls side by side5 mm
Large breed60 × 9023.6 × 35.4Raised stand plus bowls, spills to the sides8 mm
Round bowl matØ 30–40Ø 11.8–15.7Single round bowl, cat or small dog5 mm

The five-centimetre rule. Measure the widest part of the bowl base — not the rim, which flares — and add five centimetres on every side. That margin is what catches a splash when the bowl is pushed. For a cat that drags its bowl across the floor, go to 8 cm and specify a lip; a 5 mm lip on a light mat will be pushed over on the first night.

Line 04

Kitchen drying mats

cm / inch

Measure the drying rack, not the sink. This line gets returned more than any other because buyers measure the basin, then find the mat does not reach the drainer. The second number is the depth of the counter run — a mat that overhangs the counter edge will tip when a full rack is set down.

Common nameSize (cm)Size (inch)Rack it suits
Small40 × 5015.7 × 19.7Compact drainer, one-person kitchen, boat galley.
Standard45 × 6017.7 × 23.6Two-tier rack on the usual EU and US counter.
Large50 × 8019.7 × 31.5Rack plus a cutting board leaning on it.

Diatomite, not foam, if it lives by the sink. A diatomite board dries its own surface in minutes, so a rack standing on it does not sit in a puddle. Foam and microfibre hold water and need washing — that is a different product with a different pitch, and it should not be sold on a drying claim.

Line 05 · flagship

Mahjong mats

cm / inch

The mat should cover the flat playing surface and stop inside the rails, so tiles racked along the edge still sit on cloth rather than on bare table. Measure inside the rails, not the outside of the cabinet.

Table it fitsMat size (cm)Mat size (inch)BaseNote
Compact / folding70 × 7027.6 × 27.6Rubber 2 mmTravel and small folding tables.
Standard home80 × 8031.5 × 31.5Rubber 3 mmThe American 31.5 in square, which is 80 cm.
Standard home, plus85 × 8533.5 × 33.5Rubber 3 mmRoom for a discard tray at the side.
Automatic table88–90 sq34.6–35.4 sqRubber 3 mmMeasure the playing surface; cabinets vary by 3 cm.
Parlour / club90–95 sq35.4–37.4 sqRubber 5 mmHeavier use, nightly cleaning, sealed base.
Full table cover100 × 10039.4 × 39.4Rubber 5 mmMat runs to the table edge; no rail showing.

2 / 3 / 5 mm, and why they differ. 2 mm is a travel mat: it rolls into a bag and its only job is to stop tiles sliding. 3 mm is the home standard — thick enough that the tile does not click on the table, thin enough that the mat does not rock on a slightly uneven surface. 5 mm is for a parlour, where the mat is taken off and cleaned every night; a thicker base takes that handling without the edge rolling.

Two surfaces go on top of the base: diatomite, which is firm, matte and dries fast, or jacquard / faux-velvet cloth, which is softer and photographs better. Both print the same way. The cloth is the better catalogue product; the diatomite is the better working surface.

Line 06

Custom shapes

bounding box

A shape is quoted on its bounding box — the smallest rectangle it fits inside, given as width × height. A circular mat Ø 60 cm is priced as a 60 × 60 square, because that is the sheet area it consumes. That is why a wide petal shape costs more than its outline suggests.

Rectangle Any line
Round Mousepads · pet
Octagon Mahjong · TCG
Cloud Rugs · wall mats
Heart Rugs · pet mats
Paw Pet feeding
Cat head Pet · novelty
Letterform Merch · brand

What to send for a shape. A vector outline — AI, EPS, SVG, or a PDF with a real path — plus the bounding box in millimetres. A JPG of the shape is not enough: a raster edge has to be traced, and tracing adds its own error on exactly the edge you care about. With no vector file, send a dimensioned sketch and we will draw the path and send it back for approval before cutting.

Logistics

What size does to packing

freight class
Under 30 cm
Ships flat in a rigid envelope and qualifies as a large letter in most postal systems — the cheapest per unit by a wide margin.
30–60 cm
Rolled in a tube, or flat in a small carton. Dropship-friendly: a courier takes it without a pallet.
60–90 cm
Rolled only. A stitched edge matters here, or the roll set becomes permanent.
Over 90 cm
Rolled on a core in a long carton. Moves up a freight class with a per-unit surcharge — worth checking landed cost before quoting retail.
Over 4 mm thick
Cannot be folded and should not be creased. If your channel is a mailbox, stay at or under 3 mm.

Questions

Six things buyers ask about size

FAQ
Can you cut a size that is not in these tables?

Yes. Every size here is one we cut routinely, not a limit. Send the length and width in millimetres. What changes at an odd size is the yield per sheet, so the unit price moves a little — there is no tooling fee at any size, including one piece.

Do you print in centimetres or inches?

We cut in millimetres. The inch column exists because most retail buyers list in inches and a US listing that says 31.5 in converts better than one that says 80 cm. Both columns describe the same mat.

How much tolerance should I allow?

Plan on ±2 mm on a cut edge and ±5 mm on a hand-stitched border. If your artwork has a hard edge that must land exactly on the mat edge, tell us at order time and we add bleed rather than rely on the tolerance.

How do I measure an automatic mahjong table?

Measure the flat playing surface the tiles sit on, not the outer cabinet. Most automatic tables run 88–90 cm square on the playing surface, but cabinets differ enough that measuring is the only safe route. The mahjong mat page has the same table alongside the base options.

What is the smallest order for a custom shape?

One piece. There is no die and no plate, so a single die-cut mat carries the same setup as a thousand — the per-piece price is higher at one, and that is the only difference.

What file do you need for a die-cut shape?

A vector outline — AI, EPS, SVG, or a PDF with a real path — plus the bounding box in millimetres. A JPG of the shape is not enough. With no vector file, send a dimensioned sketch and we draw the path and send it back for approval before cutting.

Send a measurement. Get a mockup tomorrow.

Two numbers and a piece of artwork is all we need. No deposit, no tooling fee, no minimum beyond one piece.