1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Fulfillment

Three shipping models · cross-border only

Three ways to ship.
Pick by store type.

The same mat can leave our factory three different ways, and the right one depends entirely on where you sell. A TEMU full-managed seller should never touch inventory. An Amazon seller needs labels applied before inbound. An Etsy seller needs one piece posted to a stranger's address. We run all three off the same production line.

  • NO STOCK REQUIRED
  • FNSKU & BARCODE APPLIED
  • DDP DROP-SHIP WORLDWIDE
Three fulfillment routes out of the MatMaster factory One factory with three outbound paths: JIT consignment to a platform warehouse, labelled inbound to a seller's own FBA or 3PL, and direct dropship to the end buyer. MATMASTER FACTORY XIAMEN PLATFORM DC TEMU · TIKTOK · SHEIN JIT CONSIGNMENT YOUR FBA / 3PL LABELLED BEFORE INBOUND FNSKU · BARCODE · HANGTAG END BUYER ETSY · EBAY · OWN STORE DIRECT DROP-SHIP ONE LINE THREE EXITS
Fig. 1 — nothing is pre-built. Every unit is made after the order, then routed one of three ways.

The choice is really about who carries the stock.

All three models exist because sellers have three different risk profiles. Full-managed sellers are not allowed to hold inventory — the platform times production to the sale. Amazon sellers must hold stock, but want to hold as little as possible and never touch a label. Independent-store sellers cannot afford stock at all.

So the question is not "which is cheapest". It is "where do you want the unsold units to sit, and who should absorb a bad month". Answer that and the model picks itself.

The three models

How each one actually runs

MODEL 01

JIT full consignment

Production is triggered by the sale, not by a forecast. You sell, the order reaches us, we make one piece and ship it into the platform's warehouse on the platform's clock. No purchase order, no stock, no capital tied up in units that may not sell.

Built for TEMU · TikTok Shop · SHEIN full-managed sellers
MODEL 02

Designated warehouse inbound

You order a batch, we make it, then pack it the way the destination demands — FNSKU applied, barcode placed per the platform spec, your own hangtag attached — before it leaves. It arrives shelf-ready instead of needing a prep centre.

Built for Amazon FBA · overseas warehouses
MODEL 03

Direct drop-ship

One unit, made to order, packed and posted straight to the end customer's address with your branding on the insert card. It never sits in a warehouse you pay for, anywhere in the chain.

Built for Etsy · eBay · independent stores

Side by side

Which model fits your store

Read down the column that matches where you sell. The differences that matter are stock risk, labelling and who pays the freight leg.

  JIT consignment Warehouse inbound Drop-ship
Store type TEMU, TikTok Shop, SHEIN full-managed Amazon FBA, own overseas warehouse, 3PL Etsy, eBay, own store, social commerce
Who holds stock The platform — never you, never us You, in the destination warehouse Nobody. One unit exists at a time
Order trigger Platform sale Your purchase order Individual customer order
Minimum 1 pc per order Batch — usually 20–50 pcs per SKU 1 pc per order
Labelling Per platform spec, applied in-line FNSKU, barcode, hangtag, poly bag — all applied before palletising Your brand insert, thank-you card, no marketplace label
Freight leg Factory to platform DC Factory to your warehouse (sea or air) Factory direct to buyer, worldwide
Stock risk None Sits with you None
Best when You are testing designs at volume without capital Unit economics need sea freight and a repeatable SKU The product is personalised and can never be pre-built
The honest trade-off JIT and drop-ship cost more per unit than a container of stock — you are paying for flexibility. Warehouse inbound is the cheapest per unit and the only one where a bad forecast costs you money. Test with JIT or drop-ship, then move the winners to inbound.

Packing & labelling

It arrives ready, not requiring prep

Prep is where margin quietly disappears. Everything below is applied at packing, before the carton is closed.

Poly bag
OPP bag with a suffocation warning where the destination requires it, sized to the mat rather than one generic bag
Header card
Printed cardstock header stapled or inserted — your artwork, your barcode
FNSKU
Applied over the original barcode, positioned to the platform's placement spec, not slapped on the seam
Barcode
Your EAN / UPC / ITF-14 as supplied, verified against the SKU list before packing
Hangtag
Your own tag attached with a standard tag gun — no extra supplier needed
Gift box
Custom printed rigid or folding box, with an instruction card and thank-you card inside
Carton
Export carton with your shipping marks; packed flat or rolled depending on thickness and size
Documents
Packing list per carton, SKU-level breakdown, and photos of the packed carton on request

Timeline

What a JIT order looks like, day by day

This is the tightest of the three because the platform clock is already running when the sale lands.

Day 0

Sale lands

The order reaches us with the SKU, the personalisation data if there is any, and the destination warehouse. Nothing is made before this point — that is what makes JIT work.

Day 1

Print and cut

The archived die and print file are pulled, the piece is printed and cut. No new setup, which is why a single unit is economic at all.

Day 2–3

Edge, finish, pack

Stitched or hot-cut edge, then packed with the platform label applied. Photographed before the carton closes.

Day 3–5

Into the platform DC

Shipped to the designated warehouse on the platform's inbound window. From there the platform handles the last mile and the tracking.

Where we ship from

Four points of origin

Origin decides transit time and duty. For repeat SKUs, keeping stock closer to the buyer is usually worth more than a lower unit price.

OriginWhat it coversTypical useNote
Xiamen HQFull custom production, every material and shapeNew designs, shaped mats, personalisationWhere all tooling and archive lives
Los AngelesIn-stock lines for US deliveryFast US drop-ship, FBA replenishment3–5 day domestic transit
Germany / PolandEU deliveryEU drop-ship and marketplace inboundEU duty handled inside the bloc
MoscowRussia direct mailRU marketplaces and social commerceLocal last-mile partner

When something goes wrong

Claims, plainly stated

Overseas, a defect is not an inconvenience — it is a customer refund plus a lost review. So the rule is simple and it is on us.

01

Wrong print or wrong crop

Reprinted at our cost. Send a photo of the piece as received — no return shipping needed for a defect claim, because posting it back usually costs more than remaking it.

02

Obvious colour deviation

Judged against the approved mockup, not against a memory of it. This is exactly why the mockup is sent for sign-off before production — it is the reference both sides agree on.

03

Damaged in transit

Replaced against an unboxing photo. If the same SKU is damaged twice in a row we change the packing, not just the unit — repeating the same carton is how you get the same claim next month.

04

Sample matched, bulk did not

Should not happen, because samples run on the production line with production settings. If it does, the bulk is remade to match the sample. There is no separate sampling line to blame.

Questions

Fulfillment questions

Can I use two models at once?

Yes, and most sellers end up there. A common pattern is FBA inbound for the two best-selling designs and drop-ship for personalised orders, which can never be pre-built because the artwork arrives with the sale. Both run off the same archived die, so the pieces are identical.

Who pays the freight on a drop-ship order?

It is priced into the unit cost you are quoted, so you see one landed number rather than a unit price plus a variable shipping invoice. Ask for the quote broken down per destination region — a 100 × 100 cm mat to the US and to Germany do not cost the same to move.

Can you apply my FNSKU, or do I need a prep centre?

We apply it. FNSKU, barcode, poly bag, hangtag and carton marks are all done at packing, before the carton closes. If you have been paying a prep centre per unit, that line item can usually be removed entirely.

What happens if a JIT order is late?

The platform clock is the constraint, so tell us the inbound window at the start rather than at the end. If a specific order is at risk we will flag it before the window closes, not after — a late flag after the deadline is worth nothing to you.

Do you ship to buyers directly with my branding?

Yes. No MatMaster logo or invoice goes into a drop-ship parcel — only what you supply or approve: insert card, thank-you card, packaging. The buyer sees your brand, not a factory.

Is there a minimum for warehouse inbound?

Not a fixed one, but the economics change. Below roughly 20 pieces per SKU the sea-freight saving disappears and JIT or drop-ship is usually cheaper once you count storage. We will tell you which side of that line your quantity falls on.

Plates

What comes off the line

06 plates
Gingham car boot mat with heart motifs in a dark grey boot
Trimmed to the floor01
Floral car boot mat fitted in a black boot
Bulk, one artwork02
Four-panel sequence showing a printed armrest pad strapped to a console lid
Fitted, no fold03
Daisy-print car armrest pad fitted over a leather console
Repeat pattern, per order04
Three dogs sitting on bone-shaped printed feeding mats
Set of three sizes05
Black and panda shaped mats around the base of a toilet
Two-piece, packed flat06

Skip the ocean freight

Local production & direct shipping, four regions

For sellers who want the shipping leg to be domestic, four product groups are produced inside their sales region and shipped locally — no customs entry, no ocean leg, marketplace-ready packing.

01

United States

Rugs (velvet 700 g and 800 g) plus the full diatomite line, East and West Coast. US local production →

02

Russia

Flannel rugs, diatomite mats and rubber mousepads, priced in RMB for WB and OZON sellers. Russia local production →

03

Europe

Fabric-top mousepads and coaster sets, EU domestic delivery. Europe local production →

04

Vietnam

Dust cloth desk pads in 2–5 mm and diatomite pads, up to 1000 × 2000 mm. Vietnam local production →

Tell us where you sell. We will tell you which model.

Platform, monthly volume, and whether the artwork is fixed or arrives with each order. That is enough to pick the route.