1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Products/Bar mats & coasters

Product line 08 / 12 · bar mats & coasters

Bar mats and coasters, printed as a set.

A bar mat is a functional object that happens to carry a brand — which is why it works. It sits on the counter in every photo, it takes the spill, and it is the one piece of merchandise a bar actually keeps using after the launch night. Coasters are its smaller, more giftable sibling.

From$6.60 / pc · 1 pc MOQ

From-price is an ex-factory (EXW Xiamen) unit price — excludes tax, shipping and packaging. Final quote varies with size, material, quantity and destination.

  • 30 × 45 CM
  • RAISED CHANNEL
  • SETS OF 4/6/8
  • MOQ 1 PC
Plate 01Set of round printed mats styled as plates, with a mouse resting on one
Nitrile rubber / PVC · 30 × 45 cm · boxed sets

On the press

Set of round printed mats styled as plates, with a mouse resting on one
Plate set
Cream mahjong mat printed with a cameo border and a blank centre panel
Border print
Flat lay of four personalised mousepads: monogram, floral, marble and beach
Monogram set
Daisy-print car armrest pad fitted over a leather console
Repeat pattern
Cream mahjong mat with tiles mid-game on a linen-covered table
Fine detail

What makes a bar mat work

The channel, not the print

A bar mat exists to hold liquid. The functional part is the raised rib or channel that keeps a glass out of the puddle, and the rim that stops the puddle reaching the counter. A flat printed mat with no structure is a coaster the size of a placemat — it will be wet through in an hour.

The second requirement is grip when wet. A bar top is the wettest surface in a hospitality build; a mat that slides when a bartender pushes a glass across it is a hazard. Natural rubber with a textured back is the only base we offer for this line.

Only then does the print matter — and by then it matters a lot, because the mat is one of the few branded surfaces in a bar that stays in place for years.

What you can specify

Specification

Bar mat size
30 × 45 cm (rail) · 15 × 45 cm (single-station) · 6 × 6 / 6 × 12 in (US bar sizes) · custom.
Surface
Raised rib, square channel, or a fine dimple. Rib spacing 8–12 mm, channel depth 3–4 mm.
Rim
3–5 mm raised perimeter so spilled liquid stays on the mat.
Base
Natural rubber, 4–6 mm, textured. Grips a wet stainless or timber bar top.
Coaster size
90 / 100 / 110 mm round or square, 4 mm thick. 100 mm is the size that fits a pint and a tumbler.
Coaster build
Hardboard core with a polyester print face and a cork back. Cork is what stops the coaster sticking to a wet glass and lifting with it.
Sets
4, 6 or 8 coasters in a printed sleeve, a rigid gift box, or a kraft band. A bar mat plus four coasters in one box is the strongest gift SKU in this line.
Print
Full-colour dye-sublimation, edge to edge, on both formats.
MOQ
1 piece per design; sets assembled by hand, no minimum.
Set of round printed mats styled as plates, with a mouse resting on one
Round mats printed as plates — the same press that runs a bar rail mat

Coaster materials, compared

What a coaster is made of

Hardboard + corkCeramicStone / diatomiteSilicone
AbsorbsA littleNoYes, fastNo
Print qualitySharp, full colourSharp, but needs a decalSoft, matteMoulded colour only
Breaks if droppedNoYesYesNo
Sticks to glassNo — cork backSometimesSometimesNo
Freight weightLightHeavyHeavyLight
Best forBranded merch, setsPremium giftDesign-led DTCOutdoor / boat

The set is the product

Bundling

Sold singly, a coaster is a 3-dollar item. Sold as a mat + four coasters in a printed box, it is a gift with a price that supports air freight and a photograph that works on a product page.

We assemble the set in-house: printed sleeve, rigid box, or a kraft band with a hangtag, plus a care card if you want one. Because the components are made on the same line, a colour match between the mat print and the coaster print is not a negotiation between two suppliers.

Who buys these

Buyers

01

Breweries and distilleries

Taproom merch in runs of 100–1,000, with a launch design and a core design that reprints.

02

Coffee roasters and cafés

Counter mats and coaster sets in the same artwork as the bag label.

03

Hotels, bars, restaurants

Neutral, hard-wearing bar mats by the dozen; branded coasters for the rooms.

04

Corporate gifting

Mat-plus-coaster boxes for client gifts, with the company mark printed into the cork back.

Plates

Seen on the press

06 plates
Set of round printed mats styled as plates, with a mouse resting on one
Four rounds, four prints01
Flat lay of four personalised mousepads: monogram, floral, marble and beach
Boxed set, four pads02
Cream mahjong mat printed with a cameo border and a blank centre panel
Border-and-panel layout03
Daisy-print car armrest pad fitted over a leather console
Repeat floral04
Cream mahjong mat with tiles mid-game on a linen-covered table
Line work at 300 dpi05
Ivory and gold mahjong mat on a table with green score counters
Cream and gold06

Questions

Before you order

Will the print survive a commercial dishwasher-safe glass being set on it?
The mat is not washed — it is wiped. Sublimation print on a polyester face resists hot glass, spill and a daily damp wipe indefinitely. It will not survive being put through a glasswasher or soaked in bleach.
Can I order one bar mat for my home bar?
Yes. One piece, no setup fee, and a free mockup. The unit cost is higher than at volume but the specification is the same 4–6 mm rubber with a raised channel.
Why cork on the back of a coaster?
Cork grips a wet table without adhesive and stops the coaster lifting with the glass — the single most common complaint about cheap coasters. It also absorbs the condensation that runs down the side of a cold glass.
Can the coaster and the bar mat match exactly?
Yes, and that is the point of making both in one plant. Both are printed by sublimation from the same file, so a colour match between the box, the mat and the coasters is a production fact rather than a hope.
What is the minimum for a printed gift box?
One. Boxes are printed digitally, so there is no die-cut plate for the sleeve. Rigid boxes at one piece are expensive per unit; a kraft band or a printed sleeve is the affordable version for small runs.
Do you make branded glassware or bar tools?
No — mats and coasters only. Keeping to one material family is why we can run a single custom set without a minimum.

Send a pattern. Get a mockup tomorrow.

Artwork and a table measurement is all we need. No deposit, no tooling fee, no minimum beyond one piece.