1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY 1PC MOQ — NO TOOLING FEE ANY SHAPE · ANY ARTWORK DROPSHIP WORLDWIDE JIT FULL-CONSIGNMENT FBA · TEMU · TIKTOK SHOP WAREHOUSE DELIVERY 12 PRODUCT LINES · ONE FACTORY
Home/Journal/Spec/Die-cut artwork

Journal / Spec & production

Die-cut artwork: the file that gets cut right the first time.

A shaped mat needs two things that a rectangular mat does not: a closed path for the blade to follow, and artwork that survives being cut along that path. Neither is difficult, and both are usually missing from the first file a buyer sends.

Filed under SpecPublished September 2026Reading 6 min
Plate 01Cream cat-shaped rug with a drawn face in a nursery corner
Outline from a vector path

The four numbers

Cut line — a closed vector path, one colour, on its own layer. Not a raster image, not a selection, not 'the edge of the photo'.

Bleed — 3 mm of artwork beyond the cut line. The blade is accurate to about ±1 mm and the edge finish takes another 2 mm; without bleed you get a white sliver along one side.

Safe area — 8 mm inside the cut line, where all text and faces live. Anything closer will be cut, bound over, or hidden by the edge finish.

Final size — the physical dimensions in millimetres, in the document or in the email. '300 dpi' without a size tells us nothing.

The five file errors we see most

  1. A raster outline. A PNG of a shape with a transparent background is not a path. We can trace it, but it will be an approximation of the edge rather than your edge.
  2. An open path. A path with a 0.2 mm gap looks closed on screen and breaks the cut file. Close the path and check.
  3. Effects at the edge. Drop shadows, glows and soft edges cannot be printed past a cut — they get sliced, and the result looks like a mistake. Keep effects inside the safe area.
  4. Hairlines. A 0.25 pt stroke disappears on fabric. Minimum printable stroke on a mat is about 0.5 pt at final size, and 1 mm for anything that must read at a distance.
  5. Text converted too late. If a font is missing, we cannot set it. Convert type to outlines in the file you send, and keep a live-text version for edits.
Fig. 02Surname-shaped rug reading Olivia, with a parent and child sitting on it
Cut to a word

If you only have a photo

That is workable. A top-down photo with a ruler or a sheet of A4 in frame gives us scale and outline; we will draw the path, send it back for approval, and only then print. A hand-drawn outline on paper works the same way.

What is not workable is a photo taken at an angle with no scale — the perspective makes the outline ambiguous and the size unknowable. Two minutes with a phone held flat saves a day of back-and-forth.

What the cut does to the design

Design elementRuleWhy
Border / frame8 mm inside the cutBinding eats 4 mm, eye needs 4 mm
Text≥ 8 mm from the edgeOtherwise it is clipped or gathered
Faces / focal pointCentre thirdA cut can shave a chin at the wrong shape
Hairlines≥ 0.5 pt, 1 mm for logosFabric spreads ink
Drop shadowInside the safe area onlyCannot bleed past a cut
Pattern at the edgeMust bleed 3 mmOtherwise a white sliver shows
Fig. 04Hand resting on a die-cut leaf mousepad next to a keyboard
Cut to a leaf

Plates

Seen on the press

03 plates
Cream cat-shaped rug with a drawn face in a nursery corner
Cat path01
Surname-shaped rug reading Olivia, with a parent and child sitting on it
Lettering path02
Hand resting on a die-cut leaf mousepad next to a keyboard
Botanical path03

Questions

Can you cut from a JPG?
We can trace it, but the edge will be an approximation. A vector path gives an exact cut. Send the highest-resolution image you have plus the physical size, and we will confirm whether tracing is good enough for the outline you want.
How much bleed does a die-cut mat need?
3 mm beyond the cut line. Cutting tolerance is about ±1 mm, and a stitched or bound edge covers another 2 mm, so 3 mm is the number that guarantees no white sliver along the edge.
What resolution for a shaped mat?
300 dpi at final size, or vector. A 60 × 90 cm shaped mat is roughly 7087 × 10630 px. If your file is smaller we will tell you the effective dpi at print size before production rather than after.
Can you match a Pantone colour?
We can get close, and we will tell you the delta before printing. Sublimation on fabric shifts saturated blues and some greens, and there is no Pantone ink involved — the process is CMYK dye. Ask for a printed proof on the actual substrate for anything brand-critical.
How long does a shaped order take?
Mockup with the cut line drawn on your artwork in 24 hours; sample in 2–3 days; production 7–15 days. Drawing an outline from a photo adds a day if the photo needs interpretation.
Can you cut a hole inside the mat?
Yes — an inner closed path. The piece is removed and the new edge is sealed or bound exactly like the outside. There is no extra tooling charge; it is one more path in the same cut file.

Read next

Send a pattern. Get a mockup tomorrow.

Artwork and a table measurement is all we need. No deposit, no tooling fee, no minimum beyond one piece.